Close

How to replace a GameBoy cartridge battery without losing saved data

How to replace a Gameboy cartridge battery without losing saved data


If you’re here it’s because you want to learn how to replace a Gameboy cartridge without losing saved data. But is that even possible? Of course, it is! Just follow these easy steps and you won’t lose your precious save data ever again.


STEP 1 – GETTING THE TOOLS

Before starting you need a couple things and the first thing you’ll need is a GameBoy Advance or a Gameboy Advance SP. You can try using a regular Gameboy but you might damage it in the process.

How to replace a Gameboy cartridge battery without losing saved data - GameBoy Advance Sp


Then you’ll need a Gamebit screwdriver, to open the game’s cartridge, and a replacement battery, namely a CR205 battery. You can get both by following my guide on How to replace the battery of a Pokémon game.

How to replace a Gameboy cartridge battery without losing saved data - GameBit Screwdriver

How to replace a Gameboy cartridge battery without losing saved data - CR205 Battery


To replace the battery you’ll need something to melt that solder away so obviously, a soldering iron is the answer. Just go to your local tool shop and get one, they are quite cheap. And make sure that the tip of the soldering iron is just like the one in the photo. Also, while you’re at it. buy some decent solder as well. 



How to replace a Gameboy cartridge battery without losing saved data - Soldering Iron


And lastly, I recommend you get a cartridge from a game you don’t mind melting a little bit, however, if you have a steady hand or just don’t care about what happens to your cartridge you’re welcome to skip this.

STEP 2 – SAFETY FIRST!

Soldering Irons are hot! Be very, very careful while handling them! DO NOT TOUCH ANY PART OF IT OTHER THAN THE HANDLE! If you have zero experience in handling a soldering iron I recommend watching some tutorials on youtube and practicing before trying this. Also, don’t forget to place something like a piece of cardboard on your table, since you can accidentally leave a burn mark on it if the soldering iron slips you.

Also, but optional, you can use some goggles and gloves.

STEP 3 – OPENING THE CARTRIDGE

Now that you have all the tools we can start! Grab the screwdriver and remove the screws. Afterward, slide the cover to open the cartridge. DON’T PULL IT!

Then you can remove the circuit board and place it on a spare cartridge if want to.

How to replace a Gameboy cartridge battery without losing saved data - Opened Cartridge


STEP 4 – INSERT THE CARTRIDGE

This step is quite easy, all you have to do is insert the cartridge on the Gameboy. Then turn it on and load your save file.

How to replace a Gameboy cartridge battery without losing saved data - Insert cartridge


STEP 5 – REMOVE THE BATTERY AND PLACE THE NEW ONE

After heating the soldering iron place the tip on the solder and with the help of some tweezers (or something else) lift the battery. Repeat on the other side as well.

How to replace a Gameboy cartridge battery without losing saved data - Replace Battery


Before placing the battery be aware of its plus and minus side! You can try to utilize some of the remaining solder if you want to but I advise you to use some of your own to make sure the battery stays in place.



STEP 6 – SAVE THE GAME

You can now save your game and turn off your GameBoy. When turning it back on your save data should be there. If it’s not it’s because you didn’t place the battery correctly and need to practice your soldering skills.




STEP 7 – CLOSE THE CARTRIDGE

After a job well done you can just close your cartridge and enjoy a couple more years of your precious save data.

Hope you’ve enjoyed this guide! Any questions I’m here to answer



svg4 min read

Gamer By Mistake

2 Comments

  • Anonymous

    January 24, 2021 at 11:17 am

    Bruh no, it's possible yes but do yourself a favor and get a cart dumper. Comes with the added bonus of being able to dump the save to play on emulators or flash carts and often the ability to flash hacks and homebrews to bootleg carts, so worth it.

    Reply
  • Gamer By Mistake

    January 24, 2021 at 11:18 am

    Can you tell me which one? Last time I searched they were a bit expensive.

    Reply

Leave a reply

About Me

I'm an Outsystems Developer from Portugal and Gamer By Mistake has been my little corner on the internet since 2017.

Trending Now

Loading Feeds From Threads...